|
|
||||||
| Call 704.482.8876 or e-mail davidj@dmecutter.com | ||||||
| Photo | Qty | CRIMPERS & CRIMPER PARTS: | ||||
| Flessiner: | ||||||
| 618 | 619 | 4 | Crimpers 100 mm used nearly complete from quality environment as is or rebuilt | |||
| 659 | 660 | 661 | 4 | Transfer gearbox tables used good condition from quality environment complete with 40 hp 460v ac motor as is or rebuilt | ||
| 628 | 2 | Exit guide 6" (150mm) | ||||
| 629 | 4 | Entrance guide 6" (150mm) | ||||
| 606 | 607 | 4 | Crimper roll sets 140mm wide 37" (940mm long) complete with bearings preservative coated | |||
| 609 | 610 | 1 | Crimper roll set 4" (100mm) complete with bearings reconditioned doctor blades available | |||
| 630 | 1 | Crimper roll set 3.850" (97.8mm) complete with bearings fresh regrind matching doctor blades available | ||||
| 613 | 1 | Top doctor blade 5.510" (140mm) | ||||
| 611 | 1 | Top doctor blade 3.928" 999.8mm) used good condition | ||||
| 625 | 1 | Top doctor blade 3.880" (98.6mm0 one piece stainless steel base fresh regrind matching rolls available | ||||
| 608 | 1 | Bottom doctor blade 3.958" (100.5) used good condition | ||||
| 612 | 1 | Bottom doctor blade 5.550" (140.9mm) used good condition | ||||
| 613 | 1 | Bottom doctor blade 5.550" (140.9mm) used minor damage to tip | ||||
| 626 | 1 | Bottom doctor blade 3.915" (99.4 mm) one piece stainless steel base fresh regrind matching rolls available | ||||
| 627 | 1 | Top doctor blade 5.510" (139.95mm) used good condition | ||||
| 627 | 1 | Top doctor blade 5.510" (139.95mm) used good condition | ||||
| 627 | 1 | Top doctor blade 5.510" (139.95mm) used good condition | ||||
| 627 | 1 | Bottom doctor blade 5.540" (140.7mm) used good condition | ||||
| 627 | 1 | Bottom doctor blade 5.540" (140.7mm) used good condition | ||||
| Neumag: | ||||||
| 1 | Roll 280mm (disassembled) suitable to rebuild | |||||
| Neumag NKR: | ||||||
| 631 | 1 | Crimper roll set 5.115" (130mm) 85mm journals with bearings fresh regrind | ||||
| 615 | 4 | 280mm roll cylinders used suitable to rebuild | ||||
| 616 | 2 | 280mm roll cylinders used suitable to rebuild | ||||
| 617 | 1 | Gearbox splitter used and complete | ||||
| 662 | 1 | Gearbox splitter used and complete | ||||
| 620 | 621 | 2 | Crimper rolls 200mm 85mm journal one tire cracked complete with top and bottom doctor blades and side plates | |||
| 622 | 2 | Crimper rolls 5.120" (130mm) 80mm journal complete with bearings used fresh regrind minor shipping damage | ||||
| 624 | 2 | Crimper rolls 5.075" (128.9mm) 80mm journal complete with bearings used fresh regrind minor shipping damage | ||||
| 632 | 1 | Crimper rolls 200mm 85mm journal with bearings and doctor blades good condition | ||||
| 687 | 688 | 6 | Crimper rolls 150mm 80mm journal no bearings suitable to rebuild | |||
| 689 | 10 | Crimper rolls 250mm 80mm journal no bearings suitable to rebuild | ||||
| 633 | 3 | Journal housings 80mm complete good condition | ||||
| 634 | 4 | journal housings 80mm less end caps good condition | ||||
| 635 | 2 | Tow guide stands | ||||
| 690 | 1 | Doctor blades 250mm brass set extra long | ||||
| F05 | F06 | F07 | 12 | Side plates 20 1/2 long used some may be reconditioned call | ||
| F08 | 5 | Top and bottom doctor blades 250mm some may be reconditioned call | ||||
| CUTTER REELS: | ||||||
| MK6: | ||||||
| F10 | 1 | 1-1/2" cut length 36blds 32mm bld exp flat pins S/N 950218 new condition lummus reel (In Shipping) | ||||
| F09 | 1 | 1-3/16" cut length 48blds 32mm bld exp flat pins S/N 950216 new condition lummus reel (In Shipping) | ||||
| MODEL 20: | ||||||
| 1389 | 1 | Industry Standard 2.5mm cut length 174 blds 6.4mm bld exp flock pins S/N 12036 New Reel | ||||
| 1388 | 1 | Industry Standard 3.0mm cut length 144 blds 6.4mm bld exp flock pins S/N 12037 New Reel | ||||
| MK4/60: | ||||||
| 673 | 1 | 1" cut length 60 blds 43mm bld exp flat pins S/N 94010 complete reel good condition (court #10) | ||||
| 680 | 1 | 1"cut length 60 blds 43mm bld exp flat pins S/N 94008 complete reel good condition (court #10) | ||||
| 684 | 1 | 1-1/4" cut length 48 blds 43mm bld exp diamond pins S/N 93068 complete reel good condition (court #5) | ||||
| 682 | 1 | 1-1/4' cut length 48 blds 43mm bld exp S/N 5111-2 #217059 complete reel good condition | ||||
| 679 | 1 | 1-1/4" cut length 48 blds 43mm bld exp diamond pins S/N 93069 complete reel good condition (court #6) | ||||
| 668 | 1 | 1-1/4 cut length 48 blds 43mm bld exp S/N 5111-5 complete reel good condition | ||||
| 655 | 1 | 37mm cut length 70mm bld exp diamond pin S/N 90046 complete reel good condition | ||||
| 649 | 1 | 1-1/2" cut length 40 blds 43mm bld exp round pins S/N 91050 bare reel good condition (h-ga 35) | ||||
| 671 | 1 | 1-1/2" cut length 43mm bld exp flat pins S/N 5110-1 #214395 complete reel good condition | ||||
| 683 | 1 | 1-1/2" cut length 40 blds 43mm bld exp flat pins S/N 93095 complete reel good condition (court #9) | ||||
| 681 | 1 | 1-1/2" cut length 40 blds 43mm bld exp flat pins S/N 5110-2 complete reel good condition | ||||
| 676 | 1 | 3 1/2" cut length 17 blds 70mm bld exp round pins S/N 93050 complete reel good condition (mar-col) | ||||
| 672 | 1 | 1-1/2" cut length 40 blds 43mm bld exp flat pins S/N 93067 complete reel good condition (court #4) | ||||
| 669 | 1 | 1-1/2" cut length 40 blds 43mm bld exp flat pins S/N 93066 complete reel good condition (court #3) | ||||
| 674 | 1 | 2" cut length 30 blds 43mm bld exp round pins S/N 92069 complete reel good condition (court) | ||||
| 650 | 1 | 2" cut length 30 blds 43mm bld exp special pin .750 bld depth S/N 93021 (tn-e) bare reel good condition | ||||
| 648 | 1 | 30 blade 2" cut length 43mm blade exposure Mk4/60 cutter reel, bare reel good condition no S/N | ||||
| 670 | 1 | Vari-Cut length 21bld 43mm bld exp round pins S/N 95066 complete reel good condition (court #29) | ||||
| 666 | 1 | Vari-Cut length 21 bld 43mm bld exp round pins S/N 95064 complete reel good condition (court #27) | ||||
| 667 | 1 | Vari-Cut length 21 bld 43mm bld exp round pins S/N 95065 complete reel good condition (court #28) | ||||
| 651 | 1 | 10 blade 6" cut length, 43mm blade exposure Mk4/60 cutter reel, bare reel good condition S/N9140 | ||||
| 652 | 1 | 10 blade 6" cut length 70mm blade exposure Mk4/9 cutter reel, super reel, bare, good condition no S/N | ||||
| 653 | 1 | 8mm cut length 170blds 43mm bld exp flock pins (10 pins 5 missing) S/N 98015 good condition no drive hub(court) | ||||
| 14011 | 1 | STAGE-3 * 4mm cut length * 360 blds * 43mm bld exp * (3) STAGE-3 pins * S/N 14011 complete reel * new condition | ||||
| 14012 | 1 | STAGE-3 * 4mm cut length * 360 blds * 43mm bld exp * (3) STAGE-3 pins * S/N 14012 complete reel * new condition | ||||
| 14013 | 1 | STAGE-3 * 5mm cut length * 288 blds * 43mm bld exp * (3) STAGE-3 pins * S/N 14013 complete reel * new condition | ||||
| 14014 | 1 | STAGE-3 * 5mm cut length * 288 blds * 43mm bld exp * (3) STAGE-3 pins * S/N 14014 complete reel * new condition | ||||
| MK5/90: | ||||||
| 645 | 1 | 1-1/8" cut length 75 bld 82mm bld exp diamond pins S/N 97049 bare reel good condition (for-pla 1) | ||||
| 644 | 1 | 1-1/4" cut length 68 bld 82mm bld exp diamond pins S/N 97048 bare reel good condition (for-pla 2) | ||||
| 646 | 1 | 1-1/2" cut length 60 bld 85mm bld exp flat pins S/N 94056 bare reel good condition (court #16) | ||||
| 643 | 1 | 1-1/2" cut length 60 bld 85mm bld exp flat pins S/N 94057 bare reel good condition (court #17) | ||||
| 642 | 1 | 1-1/2" cut length 60 bld 85mm bld exp flat pins S/N 94055 bare reel good condition (court #15) | ||||
| 647 | 1 | 5" cut length 18 bld 85mm bld exp round pins S/N 02054 bare reel good condition (sol-d) | ||||
| CUTTERS: | ||||||
| 636 | 637 | 1 | Mk4 Cutter frame Left to Right. Suitable for rebuilding | |||
| 639 | 2 | Lummus Mk5 tension stands. Used, rebuildable, no drives or controls???? | ||||
| 638 | 1 | Lummus Mk4 Cutter Left to right, nearly complete, AC motor, rebuildable | ||||
| 641 | 1 | Mk4 Presser Roll w/bearing 1" Used, good condition | ||||
| MOTORS: | ||||||
| F01 | 1 | 10hp 230/460V AC cutter motor Baldor # 1DM3774T | ||||
| F02 | 1 | 10hp Eaton Dynamatic Eddy Current motor assembly 460 3ph 1750 rpm | ||||